Free blank samples Quote within 12 h Origin: Shandong, China
(01) Overview
Why choose this can
Every can is formed from 3104-H19 aluminum coil, internally sprayed with food-contact lacquer (BPA-NI or epoxy) and decorated on high-speed dry-offset printers. Choose a format below or send us your filling-line specification and we will match the can body, neck and end.
(01)
Line-ready tolerances
Flange width, neck profile and dome reversal pressure are checked every shift so cans run on standard can seamers without adjustment.
(02)
Brand-grade print
Dry-offset decoration in up to 8 spot colours with gloss, matte or speciality varnishes; we proof every design before mass production.
(03)
Food-contact safe
Internal spray lacquer in BPA-NI or epoxy; suitable for carbonated, still, acidic and alcoholic beverages.
(04)
Infinitely recyclable
Aluminum keeps its properties through endless recycling loops — a strong sustainability message for your brand.
(02) Specifications
Technical specifications
Values are nominal. We confirm a dimensioned drawing for your filling line before production.
Drawing · 250 ml stubbyNominal · mm
Custom Printed Standard Aluminum Cans specifications
Can type
Two-piece DWI aluminum can, standard 211 diameter
Volumes
250 ml stubby, 330 ml, 355 ml (12 oz), 473 ml (16 oz), 500 ml
Need a size that is not listed? Many custom heights and necks are possible.
Custom Printed Standard Aluminum Cans sizes
Size
Ø × height (nominal)
End
250 ml stubby
66 × 92 mm
202#
330 ml standard
66 × 115 mm
202#
355 ml / 12 oz
66 × 122 mm
202#
473 ml / 16 oz
66 × 157 mm
202#
500 ml
66 × 168 mm
202#
(04) Applications
Typical applications
Beer & cider
Carbonated soft drinks
Sparkling water
Juice & tea
Energy drinks
(05) FAQ
Custom Printed Standard Aluminum Cans FAQ
What is the MOQ for custom printed 330 ml cans?
The minimum order for printed standard cans is one 40-ft high-cube container (about 200,000–230,000 330 ml cans depending on palletising). Blank cans and ends are available in smaller quantities from stock.
Which can end fits a 330 ml standard can?
Standard 211-diameter cans from 250 ml to 500 ml are necked to accept a 202# end. We supply matching 202 SOT, RPT, B64 or CDL ends so the can and end arrive as a tested pair.
Can you print small runs for a product launch?
For quantities below one container we recommend shrink sleeves or labels on blank cans, or digital printing for samples. Ask us for the most economical option for your launch volume.
